16 Pin OBD2 OBD-II J-1962M MALE Straight Connector Plug Shell DIY kit J1962M

Description

The complete MALE OBD-II connector kit!
Cable exits backside of connector using supplied HEAVY DUTY strain relief
Works best with multi conductor cable .250 (1/4") diameter. Inside of strain relief is .290 diameter or you can use any combination of wired that do no exceed the .290 diameter. Strain relief has Heyco Liquid-tite type inner seal that can accommodate cable from .115 to .290 OD inner seal
Case halves held securely together with 4 supplied screws and nuts
Connector is pinned and you just solder on your wires
Includes (as shown):
16 position male connector shell with terminals and solder tabs
Heyco type sealing Strain relief
2 case halves
4 screws
Features:
OBDII J1962M 16 Pin MALE straight Connector Kit
Male
Color: Black
Easy solder on assembly
Includes heavy duty Heyco liquid-tite type strain relief and screws
OBD2 Connector Typical Pin out:
PIN 1 - Manufacturers discretion
PIN 2 - SAE J1850 Line (Bus +)
PIN 3 - Manufacturers discretion
PIN 4 - Chassis Ground
PIN 5 - Signal Ground
PIN 6 - SAE J2284 (CAN High)
PIN 7 - K Line of ISO 9141-2 & ISO/DIS 4230-4
PIN 8 - Manufacturers discretion
PIN 9 - Manufacturers discretion
PIN 10 - SAE J1850 Line (Bus -)
PIN 11 - Manufacturers discretion
PIN 12 - Manufacturers discretion
PIN 13 - Manufacturers discretion
PIN 14 - SAE J2284 (CAN Low)
PIN 15 - L Line of ISO 9141-2 & ISO/DIS 4230-4
PIN 16 – Un-switched Vehicle Battery Positive
Please let me know if you have any questions as I respond very quickly!