ANCEL DS700 Car OBD2 Diagnostic Scanner All System Bi-Directional Key ECU Coding

Description

Store category
Sign Up Now !
You may also like
ANCEL DS700 All System Bi-Directional Car OBD2 Diagnostic Scanner Key ECU Coding
Product Description
ANCEL DS700
=
10-inch HD IPS Touch Screen+ Car full system Scanner +bluetooth/wifi +30 Special service, Active test+ Android 10 OS + 64GB Memory +Quad-Core 2.0GHz processor+ 2 Years free update online
ANCEL DS700,based on the Android 10 System,is a new generation of modular high-end intelligent diagnostic equipment developed by ANCEL,featuring fully updated software's and powerful design of widespread vehicle coverage, abundant professional diagnostic features and exceptional hardware configuration etc., is the ideal scanner for professional mechanics and auto repair stores to perform all-around fixes and comprehensive tests.
ECU Coding and Active Test(Bi-directional)
This diagnostic tablet supports
ECU coding
function on a large amount of makes, including for Benz, for Ford and more. It also supports quick diagnosis via one-button VIN scanning.
Active test(Bi-deireactioanal)
is used to test whether the execution components in the electronic control system can work normally.
ANCEL DS700 OBD2 Full System Diagnostic Scanner Professional
To diagnose
Brake System
if you feel the brake pedal is mushy and notice unusual odor or noise, etc. A properly operating brake system is critical to ensure safe vehicle control and operation;
To diagnose
Emission System
if the system is affected by vehicle age or poor quality fuel. A good emission system reduces harmful gases to a large degree and protects you from being fined;
To diagnose
Fuel system
if vehicle won’t start or “Check Engine” light is illuminated. Check car’s fuel system regularly ensures the best performance of your car with the lowest emissions;
To diagnose
Transmission System
if your car is slipping or difficult to shift. The system plays an important part in the overall performance of your car;
To diagnose
Wiper System
if you observe chattering or streaking wiper. If the car is not regularly checked, the accident might happen because you can’t see clearly;
To diagnose
Light System
if you see rapid signal blinking or dimming lights.
And many more ...
ANCEL DS700 Support 30+ Special Functions
(There are only 28 reset services now, and will be upgraded to 30 soon)
1.Oil Reset
The lightening of the car maintenance light indicates that the vehicle needs maintenance.Reset the mileage or driving time to zero after the maintenance,so the maintenance light will go out and the system will start a new maintenance cycle.
2.DPF Regeneration
DPF Regeneration is used to clear PM(Particulate Matter)from the DPF filter through continuous combustion oxidation mode(such us high temperature heating conbustion,fuel additive or catalyst reduce PM ignition conbustion)to stabilize the filter perfornance.
DPF regeneration may be performed in the following cases:
a)The exhaust back pressure sensor is replaced.
b)The PM trap is removed or replaced
c)The fuel additive nozzle is removed or replaced
d)The cataytic oxidizer is removed or replaced.
e)The DPF regeneration MIL is on and maintenance is performed.
f)The DPF regeneration control module is replaced.
3.AFS(headlamp) Reset
The feature is used to initialize the adaptive headlamp system.According to the ambient light intensity,the adaptive headlamp system may decide whether to automatically turn on the headlamps,and timely adjust the headlamp lighting angle while monitoring the vehicle speed and body posture.
4.EGR Adaption
This function is used to learn the EGR(Exhaust Gas Recirculation)valve after it is cleaned or replaced.
5.Brake-pad Reset
If the brake pad wears the brake pad sense line,the brake pad sense line sends a signal sense line to the on-board computer to replace the brake pad.After replacing the brake pad,you must reset the brake pad.Otherwise,the car alarms.
Reset must be performed in the following cases:
a)The brake pad and brake pad wear sensor are replaced.
b)The brake pad indicator lamp is on.
c)The brake pad sensor circuit is short,which is recovered.
d)The servo motor is replaced.
6.IMMO Service
To prevent the car being used by unauthorized keys,the anti-theft key matching function must be performed so that the immoblizer control system on the car identifies and authorizes remote control keys to normally use the car.When the ingnition switch key,ignition switch,combined instrument panel,ECU,BCM,or remote control battery is replaced,anti-theft key matching must be performed.
7.Windows Calibration
This feature is designed to perform door window matching to recover ECU initial memory,and recover the automatic ascending and descending function of power window.
8.Coolant Bleeding
Use this function to activate the electronic water pump before venting the cooling system.
9.Steering Angle Reset
To reset the steering angle,first find the relative zero point position for the car to drive in straight line.Taking this position as reference,the ECU can calculate the accurate angle for left and right steering.After replacing the steering angle position sensor ,replacing steering mechanical parts(such as steering gearbox,steering column,end tie rod,steering knuckle),performing four-wheel alignment,or recovering car body,you must reset the steering angle.
10.Injector Coding
Writing injector actual code or rewrite code in the ECU to the injector code of the corresponding cylinder so as to more accurately control or correct cylinder injection quantity.After the ECU or injector is replaced,injector code of each cylinder must be confirmed or re-coded so that cylinder can better indentify injectors to accurately control fuel injection.
11.Seat Calibration
This function is applied to match the seats with memory function that are replaced and repaired.
12.Transport Mode
In order to reduce power consumption,the following functions may be disabled,including limiting the vehicle speed,not waking up the door opening network,and disabling the remote control key,etc.At this time,the transport mode needs to be deactivated to restore the vehicle to normal.
13.Battery Matching
This function enables you to perform a resetting operation on the monitoring unit of vehicle battery,in which the original low battery fault information will be cleared and battery matching will be done.
Battery matching must be performed in the following cases:
a)Main battery is replaced.Battery matching must be performed to clear original low battery information and prevent the related control module from detecting false information.If the related control module detects false information,it will invalidate some electric auxiliary functios,such as automatic start&stop function,sunroof without one-key trigger function,power window without automatic function.
b)Battery monitoring sensor.Battery matching is performed to re-match the control module and motoring sensor to detect battery power usage more accurately,which can avoid an error message displaying on the instrument panel.
14.Airbag Reset
This function resets the airbag data to clear the airbag collision fault indicator.When the vehicle collides and the airbag deploys,the corresponding fault code of the colision data appears,the airbag indicator lights up,and the fault code can't be cleared.Since the data inside the airbag computor is disposable,it is required that all new accessories must be ewplaced,but after performing this function,the data of the airbag computer can be recovered and the fault code can be cleared,the airbag light will go out,and the airbag computer can continue to use.
15.Tyre Reset
This function is used to set the size parameters of the modified or replaced tire.
16.ODO Reset
a)ODO reset is to coopy,write,or rewrite the value of kilometers in the chip of odometer by using a car diagnostic computer and data cable,so that the odometer shows the actual mileage.
b)Usually when the mileage is not correct due to the damaged vehicle speed sensor or odometer failure,it is necessary to do ODO reset after maintenance.
17.ABS Bleeding
When the ABS contain air,the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity.If the ABS computer,ABS pump,brake master cylinder,brake cylinder,brake line,or brake fluid is replaced,the ABS bleeding function must be performed.
18.Gear Learning
19.Language Change
This function is used to change the system language of the vehicle central control panel.
20.Adblue Reset
After the diesel exhaust treatment fluid (car urea) is replaced or filled up,urea reset operation is required.
21.Elec. Throtle Adaption
22.Suspension Matching
This function can adjust the height of the body.When replacing the body height sensor in the air suspension system,or coontrol module or when the vehicle level is incorrect,you need to perform this function to adjust the body height sensor for level calibration.
23.A/F Reset
This function is applied to set or learn Air/Fuel ratio parameters.
24.Nox Sensor Reset
Nox sensor is a sensor used to detect the content of nitrogen oxides (NOx)in engine exhaust.If the NOx fault is re-initialized and the NOx catalytic converter is replaced,it is necessary to reset the catalytic converter learned value stored in the engine ECU.
25.TPMS Reset
26.AT Learning
27.Sunroof Initialization
This function can set the sunroof lock off,closed when it rains,sliding/tilting sunroof memory function,temperature threshold outside the car etc.
28.Stop/Start Reset
This function is used to open or close the automatic start-stop function via setting the hidden function in ECU(provided that the vehicle has a hidden function and supported by hardware)
And many more......
Multi-languages Support
Italian, English,German, Japanese, Russian, French, Spanish, Portuguese, polish, Turkish, Dutch, Greek, Hungarian, Arabic, Danish, Korean, Persian, Romania, Serbia, Finnish, Swedish, Czech,Chinese(traditional)
Remote Technical Support
By using this function, users can receive ad-hoc remote support from ANCEL's technical engineers, colleagues, or friends, by allowing them to control this tablet device on their PC via the TeamViewer software.
Supports 10000+ car models from America, Europe, Asia (Including Russian car models, Chinese car models, Indian car models, Malaysian car models, Australian car models, Brazilian models, Latin American models and other national car models)
American
:BUICK,CADILLAC,CHEVROLET,CGRYSLER,DODGE,FIAT(BRAZIL),FORD,FORD(AUSTRALIA),GM,GM(BRAZIL),JEEP,LINCOLN
European
:ABARTH,ALFA ROMEO,ASTON MARTIN,AUDI,BENTLEY,BMW,BUGATTI,CITROEN,DACIA,DR,FORD(EUROPE),FERRARI,FIAT,GAZ,OPEL(SOUTH AFRICA),IVECO,IZH,JAGUAR,LAMBORGHINI,LANCIA,LAND ROVER,MASERATI,MAYBACH,MERCEDES-BENZ,MINI,OPEL,PAZ,PEUGEOT,PORSCHE,RENAULT,ROLLS ROYCE,ROVER,SAAB,SEAT,SEAZ,SKODA,SMART,SPRINTER,UAZ,VAUXHALL,VAZ,VOLVO,VW,ZAZ
Asian
:ACURA,DAEWOO,DAIHATSU,HOLDEN(AUSTRILIA),HONDA,HYUNDAI,IKCO,INFINITI,ISUZU,KIA,LEXUS,LUXGEN,MAHINDRA,MAHINDRA(INDIA),MARUTI,MARUTI(INDIA),MAZDA,MITSUBISHI,MVM,NISSAN,GTR(NISSAN),PERODUA,PERODUA(MALAYSIA),PROTON,PROTON(MALAYSIA),SAMSUNG,RENAULT SAMSUNG,SAIPA,SSANGYONG,SUBARU,SUZUKI,TATA,TATA(INDIA),ISUZU(THAILAND),TOYOTA,UNITED PAKISTAN
Chinese
:SENOUA(BAIC),WEIWANG(BAIC),BJEV,BAIC,BRILLIANCE,BYD,CHANGAN,CHANGHE,BUICK(CHINA),CHERY,CHANCHE SUZUKI,DFCITROEN,ECUAID,FAW(TIANJIN),FOTON,GEELY,JINLONG,GONOW,GWM,HAFEI,HAIMA,JAC,JAC REFINE,SHIERAY,JMC,JOYLONG,LIFAN,MG(SAIC),QOROS,MAXUS,SGM,SOUEAST,SPARK,SGMW,DFSK,XINKAI,POLARSUN,ZX AUTO,ZOTYE
ANCEL DS700 Auto Scanner Key Analysis:
1.Key Analysis
2.Power Key
Press and hold it for 3 seconds to turn it off
Press and hold it for 8 seconds to perform forced shutdown
Press it once to activate or turn off the device
3. Type C Charging Slot:connect the suppiled charger for charging
4. USB Port:Reserved for add-on modules and other device with similar port
5. Rear Camera
6. Speaker
7.Backplane:remove the backplane of the tablet,and install function modules on the backend
8.PIN:Used for communication between the function expansion module and the host
9.Adjustable Kickstand:Flip out it to 180-degree angle and work comfortable at your desk,or hang it on automotive part
10.Rubber Protection Sheet
Product Parameters
Operating System: Android 10
Camera:Rear camera 8.0MP
Memory:4G
Network:Wi-Fi, WL AN 802. 11b/g/n
Storage:64G
Bluetooth: Bluetooth 5.0
Battery: 6000mAh/7.6V
Working Temperature: 0°C ~ 50°C
Screen: 10 inches
Storage Temperature:-20°C ~ 60°C
Product Detail
FQA
Q:Is the device updated for free? Will the product still work if it is not updated?
A:ANCEL DS700 support 2 year free update,if you don't update it,it will still work normally
Q:Do I need to pay taxes?
A:It depends on your local customs
Q:Whether to support all brands？
A:ANCEL DS700 support 10000+car models,it fit for Brazil,Malaysia,Chinese,US,Russian,EU cars
Q:Whether to support trucks？
A:No,our store have X6 HD and X7 HD to support trucks.
Q:Whether to support ECU Programming?
A:Yes,please provide us with the specific model and release year, we will check it for you
Q:Whether to support key programming and adjust mileage?
A:It support IMMO service and odo reset,if you want deeper functions, you could check DP500 in our store
We Accept payment
You want to know about delivery
Terms of sales
About us
Contact us
We Accept payment
1.We accept payment by
PayPal only
!
2.
Payment
should be completed
Within 8 days
after buyer places the order, or else an ebay
Unpaid Case
will be opened .
3.If you
Can Not Pay in time
or
Don't Want to Buy
this product any more , please
Cancel
the transaction
Before
the Unpaid Case is Opened.
You want to know about delivery
1.All of the items will be
shipped to buyer's EBAY address,
please
confirm
your address on Ebay before you buy.
2.Your order will be usually shipped out the same or next business days once the payment is made and cleared, except on weekends and holidays.
3.Most of products are checked and tested carefully before shipment.Well Packed protects your items with suitable material so as to avoid damage during transit.
Terms of sales
1. We can not guarantee that you will be able to access every module or use every piece of cd/dvd software. Compatibility varies due to variations in the cars modlue or availabilty of year it released from original factory
2.It's the buyer's responsibility to complete clearance when parcel reached your Customs.
3.We are not responsible for buyers's local taxes, please consult local Customs for Tax Details.
About us
1.We maintain high standards of excellence 5 Star feedback and strive for 100% Customer satisfaction. Please do not hesitate to leave us your positive feedback if you are
satisfaction
with our products ,delivery or services .
2.If you have
any questions
about our products or services,
Please Contact us
immediately before you leave Neutral or Negative feedback,So that we can satisfactorily address your concerns. We will reply you within 12 hours, except on Weekends and Holidays.
3.If you have any needs for products, please contact us ,we’ll do our best solve with you .
4.Solve any problems with you in friendly way after communication.
Refund or Replacement
will be provided as you like.
Contact us
1.
We are committed to providing customers with the best products and services
，Please do not hesitate to leave us your positive feedback if you are satisfaction with our products ,delivery or services .
2. If you have Any Questions, Please do not hesitate to
Contact Us by email/ ebay message.
We will
reply
you
within 12 hours
and do our best solve the problem with you （Except on Weekends and Holidays） .
3.
Work time:
GMT8 (9:00am-18:30 PM) ,Except for Saturday (9:00-11:00AM) .
Feedback